Tech Corner

Technical Q and A for classic motorcycle maintenance and repair.

Honda CB550 Valves

12/18/2013 10:21:00 AM


Tech Corner

Honda valves

Q: The valves on my 1975 Honda CB550 will not stay adjusted. I read somewhere that an updated cam cover is available to correct this problem. Can you offer any suggestions? — Ken Czernicki/via email

A: You don’t say whether the valve clearances open up or close down. If your valve clearances keep closing down and your adjusters are tight, then it is probable you’re suffering from valve recession. That happens when the valve seats or the valves wear down, causing the valves to sit deeper in the seat, closing up the valve clearance. You can cure it with new valves and seats. If your valve clearances are growing larger over time, I’d take a close look at the adjusters. They may not be locking up when you tighten down the locknut after adjusting them. A long shot possibility for increasing clearances would be the camshaft itself wearing down into its bearing blocks in the head, but that would only result from extremely poor oiling: I think you’d be hearing some unusual noises if that were the case. The information I have about the later covers is that they improved the retaining of the rocker shafts, which cut down on wear. On the early covers the rocker arm pins can rotate, wearing their round bearings oval. MC

Related Content

Honda CB750A: Honda's Automatic Motorcycle

Australian motorcycle enthusiast Ian Lee tells the story of the Honda CB750A Down Under.

Triumph Valve Adjustment

Keith Fellenstein offers some guidelines regarding Triumph valve adjustment.

Primer on Motorcycle Valve Trains

Ever wonder why it matters where the camshaft on a four-stroke engine is located? This primer on mot...

Backfiring Problem: Triumph TR650

Motorcycle Classics’ tech expert Keith Fellenstein helps solve a backfiring problem with a Triumph T...

Content Tools

Post a comment below.


12/26/2013 4:36:53 PM
Jeff, You should check out Beatrice Cycle, They are in Beatrice Nebraska and have just about everything you could want in the way of parts for your Trail 90. My wife has a 1967 CT90 and I've gotten lots of parts from them for her bike. Keith Fellenstein

12/25/2013 9:44:50 PM
I have a 1968 Honda CT90 in fantastic shape and need to know of a good source of parts. Do they have an aftermarket electronic ignition available for them? I really want to get it back on the road! Thanks for any help you can give. Jeff Johnson

no image
4/14/2014 9:35:30 PM
no image
4/12/2014 1:45:10 PM
no image
4/11/2014 4:29:22 PM
no image
4/10/2014 10:08:16 PM
no image
4/10/2014 8:35:40 PM
no image
4/10/2014 12:35:33 PM
no image
4/9/2014 7:12:15 PM

The sound and the fury: celebrate the machines that changed the world!
First Name: *
Last Name: *
Address: *
City: *
State/Province: *
Zip/Postal Code:*
(* indicates a required item)
Canadian subs: 1 year, (includes postage & GST). Foreign subs: 1 year, . U.S. funds.
Canadian Subscribers - Click Here
Non US and Canadian Subscribers - Click Here

Motorcycle Classics is America's premier magazine for collectors and enthusiasts, dreamers and restorers, newcomers and life long motorheads who love the sound and the beauty of classic bikes. Every issue  delivers exciting and evocative articles and photographs of the most brilliant, unusual and popular motorcycles ever made!

Save Even More Money with our RALLY-RATE plan!

Pay now with a credit card and take advantage of our RALLY-RATE automatic renewal savings plan. You save an additional $4.95 and get 6 issues of Motorcycle Classics for only $24.95 (USA only).

Or, Bill Me Later and I'll pay just $29.95 for a one year subscription!