Race to Rebuild: The BMW R90/6 Part 4

The Motorcycle Classics/Dairyland Cycle Race to Rebuild 1974 BMW R90/6 is racing to a finish, and it’s looking like a winner.


| March/April 2013



race

Like every build we’ve done, our 1974 BMW R90/6 has seen more then a few twists and turns in the road to completion.

Photo Courtesy MC Staff

If you’re disappointed not seeing the finished Motorcycle Classics/Dairyland Cycle Race to Rebuild BMW, don’t be. We could show you more, but then we wouldn’t be able to tell you more about our race to the finish, and we wouldn’t be able to show you the finished bike with, we hope, its new owner.

OK, so maybe we like stringing things out a bit. But in this case we have a good reason, namely the simple fact that as of press time, the winner of the Motorcycle Classics/Dairyland Cycle Race to Rebuild Sweepstakes hadn’t been confirmed. Because of that, we decided it’d be more fun to wait until next issue to unveil our finished BMW and let everyone, the winner and the rest of you, experience the finale at the same time.

Like every build we’ve done, our 1974 BMW R90/6 has seen more then a few twists and turns in the road to completion. Last issue, we told you about some of the unexpected mechanical issues we had to sort through (cylinder head woes, instrument woes, etc.). Since then, we had a few more head-scratchers, most notably figuring out how to mount the très cool replica Ducati 900SS fairing we got from Airtech.

Following an established practice of “ready, fire, aim,” we settled on the fairing we wanted before researching how to attach it. When we discovered there are no kits to mount Ducati fairings on BMWs, we just dove in deeper. If you’re a commercial fabricator, mounting a fairing is just another challenge in metal, cutting and welding your way. But we’re not commercial fabricators, and while we keep swearing we’re going to learn to weld, neither of us has. So we did what we always do, and that was spend a little extra time — time we didn’t really have — figuring out a way to mount our Ducati fairing. Eventually we did figure it out, and next issue we’ll show you what we came up with.

Another issue was instrumentation. Originally, we liked the idea of keeping the stock clocks on our Beemer, but eventually we decided the cost of overhaul just didn’t make sense. Used units are expensive — if they work — and a speedo/tach rebuild can run from $350 to as much as $1,000. Enter Spiegler Performance Parts, who sell an amazing array of digital instruments including the super hip Motogadget Motoscope Pro. For about the same money as a rebuild ($547 with the mounting plate) we got a new digital speedo/tach that’s easy to configure, plus it is set up to accept optional “breakout” boxes to let you input just about anything you could possibly want to through the Motoscope Pro. And by way of major bonus, it looks fantastic on our custom R90.

We also had Spiegler perform their BMW brake rotor conversion. We didn’t strictly need a new rotor, but we were intrigued by Spiegler’s conversion, which involves removing the stock rotor from its carrier and mounting a new stainless steel rotor on buttons for a semi-floating disc brake. It should work excellently and it’s also cost-effective, as a stock replacement rotor from BMW runs $350 and the Spiegler conversion is $240. Very cool.

gerald estes III
3/2/2013 1:37:35 AM

project beemer - wow. keepers of the faith, thnx. project beemer image gallery: finally, a "naked bike" worth some consideration. for the most part im in agreement w/ the upgrade replacement parts. id complete the chassis a bit differently - a leather covered piece of plywood? if it was mine to ride...looking ridgid aint very plush and would probably add up to zilch windshield time on my part - suggestion? stick with your projected goal and budget for it.






bike on highway

Classic Motorcycle Touring and Events.


The latest classic motorcycle events and tours.

LEARN MORE