Project 1970 Honda CB350

Join us on our newest project as we take stock of a badly neglected, but still salvageable, 1970 Honda CB350.


| September/October 2015



1970 Honda CB350

Our project 1970 Honda CB350.

Photo by Richard Backus

The is the first in a series on our 1970 Honda CB350 build project. Read Part II, Part III, Part IV, Part V, Part VI, Part VII and Part VIII for the later installments. You can also watch video of our Honda running for the first time.

Last issue, we told you about plans for our next build project, a 1970 Honda CB350. But “build” isn’t quite the right word, conjuring up as it does images of a one-off custom café or street scrambler. Instead of going the custom route, this time around we’re going stock, taking a tired and neglected CB350 and returning it to original — well, almost.

Almost, because our goal isn’t a restoration, per se — think sympathetic rehab, like our very first project back in 2007 when we returned a tired 1971 Triumph TR6C Trophy Special back to road-worthiness. With that project, we focused on making our Triumph a solid runner. Originality only mattered to a point: We weren’t hung up on making the bike perfect, because the end goal was showing how you could get an old Triumph back on the road without breaking the bank. That’s basically our approach with this next project, but this time we’re going to work a little harder at maintaining our bike’s original styling cues.

We picked the Honda CB350 twin because we think they’re great little bikes. A hugely successful platform (Honda sold an estimated 626,000 CB/CL350s between 1968-1973), the CB350 was Honda’s bread and butter bike. Affordable, reliable and stylish, its popularity continues today for those same reasons. AHRMA racers love them as the basis for fun and affordable racing, and they’ve been rediscovered by a new generation of riders looking for a cool vintage scoot. That’s good — CB350s deserve the attention — and bad — the renewed attention means prices have been going up and true bargains are getting harder to find.

Our bike

Looking at our starting point, you could be excused for dismissing it as a parts bike — or worse. Majorly disassembled, we’ll admit it’s a pretty sad-looking machine, with more than a few detracting elements: The gas tank sat in the sun so long that one side is orange and the other silver from the sun burning off the top coat; the seat is torn; the headlamp bucket is broken; the handlebar controls are mostly missing their guts; the tires were shot 20 years ago; and the chain is so rusty it could probably stand on end. We paid $200 for this glorious mess. Brilliant, eh?

What’s important, however, is what you don’t see. As bought from its former would-be restorer, our CB350 came with several boxes filled with its original parts. Following an all too familiar scenario, the previous owner had started down the restoration road before running out of momentum. He’d removed almost all of the Honda’s hardware for refurbishing, and had even gotten around to rehabbing a few items, including the airboxes, toolbox and battery box, and the chain guard. Our parts stash includes both fenders, the side covers, two tachometers, a nonstock exhaust, the rear shocks, blinkers, electrical components, headlamp, foot pegs, cables, new tank and side cover emblems, and an organizer containing what appears to be most of the bolts and washers taken off the bike during disassembly. Time will tell, but it looks like we have most of what we need, although we know that sourcing the correct exhaust system will be a challenge. Aftermarket units are readily available, but we’d really like to stick to the stock setup.

JONC
8/27/2015 6:41:59 PM

I lucked into a '70 ruby red true survivor CB350 (4500 miles and stored well)several years ago. Paint is still very nice except for a bit of fading on the headlight. Aluminum bits have aged with grace. Just got the carbs back on after a soak in the ultrasonic cleaner. Last unpickle showed a high speed miss under throttle, which was likely a secondary main jet(never seen that before) plugged. A 50 mile test ride today reminded me of how much torque that little engine has, compared to my Superhawk. It's off to a VJMC rally in a couple of weeks for a couple of rides and a show. Richard, hope y'all at MC Classics eventually have as much fun with yours, as I've had with mine. Great little bike!


Bankerdanny
8/27/2015 11:26:13 AM

There is no good reason to replace the jets and needles on a low mileage bike. The quality of aftermarket jets is very suspect. Clean everything well. Use the gaskets from the kits, but install the original jets/needles. You will be better off.


john@smallenginemachineworks.com
8/23/2015 11:12:06 AM

Hi Guy’s; I’m new to this pub, why would you send cylinder repair on this 350 Honda to Millennium? Millennium is a plating facility; early Honda cylinders are plain old cast iron. There are other places who do quality work on vintage cylinders. John Tice www.smallenginemachineworks.com






bike on highway

Classic Motorcycle Touring and Events.


The latest classic motorcycle events and tours.

LEARN MORE