Rear Brake Master Cylinder Found
Editor’s note: If you’re having trouble with that old Suzuki, BSA or BMW, Keith Fellenstein is your guy. From motorcycle tuning tips to detailed motorcycle engine repair, he can draw from a wealth of experience to help guide you to success. Send questions to: Keith’s Garage, Motorcycle Classics, 1503 SW 42nd St., Topeka, KS 66609, or send an e-mail with “Keith’s Garage” as the subject.
Master cylinder found
Q: Last issue, Dennis Ventura wrote in looking for a rear brake master cylinder for his 1983 Kawasaki GPz750. He recently sourced a cheap and effective replacement and wrote in to tell us about it. Well done! — Ed.
A: I wanted to give you an update regarding my GPz rear brake woes. I solved the problem by going to a nearby Japanese bike salvage yard and just plunking down the old one on the table and asking, “What do you have that looks like this?” The gentleman helping me came back with one that looked similar, complete with remote reservoir, from a late-model Kawasaki Ninja 250cc. Everything lined up. I used the 1983 mounting bolts and the line from the master cylinder to the rear caliper was the same size, as well. The reservoir even went into place using the 1983 hardware. It cost $50. I forgot just how much fun that bike is to ride. —Dennis Ventura/via email
Solving Wet-Sumping Issues on Norton Commandos
Keith Fellenstein walks you through two ways to stop your classic Norton Commando from wet sumping in this pictorial how-to.
Norton Commando Q and A with Keith
This issue Keith answers Norton Commando questions on running too rich, jets and needles, and hearing more about using a TwinMax.
Electrical, 2-Strokes, Misfire and Carb Issues Q and A with Keith
1978 Triumph T140 electrical issues, reviving 2-strokes, Suzuki misfire, and more carb issues are this month’s featured questions Keith answers.