×
×

TAG : Motion Pro

PBR Tool by Motion Pro

 The motorcycle tool specialists at Motion Pro have introduced the best chain tool we’ve ever used. The new PBR Tool (Press-Break-Rivet) features a changeable anvil block that’s placed in different positions in the tool body depending on whether you need to press, break or rivet a chain. ...

Cable Luber V3 by Motion Pro

Maintenance hounds know that properly lubed control cables are critical to safe and dependable riding. Up until now, the standard tool has been a fairly crude unit that seals the inner cable and housing so that aerosol lube can be pushed into the housing. It works, but it's messy, and it seems ...

Cable Luber V3 by Motion Pro

Motion Pro has introduced a new cable lubing tool. Most cable lube tools slip around the cable and are then clamped shut to make a seal, with spray lube fed through a small hole via the spray wand. They work OK, but they're also pretty messy as they don't usually seal well, particularly after ...

Brass-Bladed Gasket Scraper by Motion Pro

This brass-bladed gasket scraper from the motorcycle tool pros at Motion Pro is ideal for scraping gaskets off aluminum faces, which can be easily damaged with steel scrapers or razor blades. The ergonomic handle is machined from 6061 billet aluminum and also doubles as storage for an extra ...

Spinner T-Handle Drivers by Motion Pro

Quick spinTool specialists Motion Pro’s bearing-mounted Spinner T-Handle drivers are perfect for those bolts and screws you want to spin off or on quickly. The swivel drive 3/8in Spinner T-Handle II was perfect for spinning on the side cover bolts on our project Honda CB350, and the swivel ...

Degree Wheel by Motion Pro

 Degree wheel If you’re not sure whether the ignition or cam timing on your engine has been properly set, a degree wheel is the best way to check, allowing you to confirm proper ignition and cam timing specifications. Made from 0.052-inch thick aluminum with a 6-3/4-inch outside diameter ...

Steering Head Puller by Motion Pro

Steering head pullerMotion Pro has this great tool for removing steering head outer bearing races without having to resort to the usual hammer and punch. Designed to work on all tapered bearing races with a 47mm-52mm OD, the puller ensures that bearing races are removed perfectly straight, ...

Torque Wrench Adapter

Torque wrench adapter Motorcycle tool specialists Motion Pro make this adjustable torque wrench adapter for torquing hard-to-reach nuts and bolts. It works with any 6mm through 19mm metric or 1/4in through 3/4in SAE combination wrench and with 6mm and 8mm Allen wrenches. We used it to torque ...

Mini Bleeder

Mini brake bleederFrom motorcycle tool specialists Motion Pro comes this cool Mini Bleeder. Available in 3/8-inch, 8mm, 10mm and 11mm sizes, the Mini Bleeder lets you easily flush and bleed your hydraulic systems. A one-way check valve lets you use it as a flushing tool, leaving the bleeder ...

Motion Pro Carb Tool

This Carb Tool from Motion Pro features a 90-degree 1/4-inch hex drive for synchronizing carburetors.Leave it to Motion Pro to offer an affordable, usable specialty driver to help you when synchronizing carburetors on multi-cylinder engines. Made of aircraft-grade aluminum and stainless steel, ...

Motorcycle Classics Magazine

Featuring the most brilliant, unusual and popular motorcycles ever made!