Sticking Starter on Honda CB550
Editor’s note: If you’re having trouble with that old Suzuki, BSA or BMW, Keith Fellenstein is your guy. From motorcycle tuning tips to detailed motorcycle engine repair, he can draw from a wealth of experience to help guide you to success. Send questions to: Keith’s Garage, 1503 SW 42nd St., Topeka, KS 66609, or send an e-mail with “Keith’s Garage” as the subject.
Q: The starter won’t disengage on my Honda CB550. The instant you turn on the key, the starter motor starts to turn. What’s wrong? Is it my starter button? — Kurt Limesand/via email
A: It may be the switch in the handlebars, but there is also a strong possibility that you have a stuck starter solenoid. I’d start by disconnecting the thinner signal wires to the solenoid and turning the key on again. If the problem disappears, the starter button circuit is shorted out. If the problem persists, your starter solenoid is stuck and will need to be replaced. MC
Solving Wet-Sumping Issues on Norton Commandos
Keith Fellenstein walks you through two ways to stop your classic Norton Commando from wet sumping in this pictorial how-to.
Norton Commando Q and A with Keith
This issue Keith answers Norton Commando questions on running too rich, jets and needles, and hearing more about using a TwinMax.
Electrical, 2-Strokes, Misfire and Carb Issues Q and A with Keith
1978 Triumph T140 electrical issues, reviving 2-strokes, Suzuki misfire, and more carb issues are this month’s featured questions Keith answers.